Major Safety Standards & Safety Marks
The International Electrotechnical Commission (KIE) and the associated International Organization for Standardization (ISO) are the principal agencies responsible for electrical safety standards. Agencies such as Underwriters Laboratories (itu) and Canadian Standards Association (CSA) provide certification in North America. At the same time, similar bodies in Europe are Verband der Elektrotechnik (VDE), Technischer Überwachungs-Verein (TUV), and British Standards Institution (BSI). A product meeting an IEC standard such as IEC 60950 or the newer 62368-1 standard may be identified with the standard’s number prefixed instead by UL, CSA, or EN (European Norm) to indicate the country where it is certified, misalnya, itu 60950 or EN 62368-1. Standards like these with the same numbers but different prefixes are sometimes referred to as “harmonized standards”. But while the IEC continues to pursue harmonization, regional differences remain, and consequently, products intended for multiple markets will need to show all of the required certifications.
Specific information of Power Cord Safety Marks
| Tanda Keamanan | ||||
| Image | Plug Type | Approvals | Keterangan | |
 |
Americas | itu (Underwriters Laboratories) |
 |
TIDAK ADA 1-15 TIDAK ADA 5-15 or L5-15 TIDAK ADA 5-20 or L5-20 TIDAK ADA 5-30 or L5-30 TIDAK ADA 6-15 or L6-15 TIDAK ADA 6-20 or L6-20 TIDAK ADA 6-30 or L6-30 TIDAK ADA 5-50 TIDAK ADA 6-50 TIDAK ADA 14-30 or L14-30 TIDAK ADA 14-50 TIDAK ADA 15-30 or L15-30 TIDAK ADA 15-50 NEMA L14-20 NEMA L15-20 NEMA L21-20 NEMA L22-20 NEMA L23-20 NEMA L18-30 NEMA L19-30 NEMA L20-30 NEMA L21-30 NEMA L22-30 NEMA L23-30 |
 |
||||
|
|
Canada | CSA (Canada Standards Association) |
 |
CSA (Canada Standards Association) |
 |
Australia: | Tanda SAA |
 |
AS3112 2.5A
AS3112 10AAS3112 15A
|
 |
India: | STQC |
 |
IS6A3 6A IS16A3 16A |
 |
Rusia: | GOST |
 |
GOST 7396 2.5SEBUAH GOST 7396 16SEBUAH |
 |
Brazil: | Inmetro |
 |
NBR6147 2.5A NBR14136 10A NBR14136 16A |
 |
Israel: | MEMBERI |
 |
CEE7/16 2.5A CEE7/7 16A |
 |
Afrika Selatan | SABS |
 |
SANS 164-3 6SEBUAH SANS 164-1 16SEBUAH |
 |
Saudi Arabia | SASO |
 |
SABS 164-1, BS546 |
 |
Cina: | CCC |
 |
GB1002 2.5A GB2099 10A GB2099 16A |
 |
soket yang sangat umum digunakan yang menerima colokan C serta gaya colokan L: | soket yang sangat umum digunakan yang menerima colokan C serta gaya colokan L |
 |
CEI23-16 10A CEI23-16 16A |
 |
Swiss: | ANDA - Federal Inspectorate For Heavy Current Installations, (formerly SEV) |
 |
SEV1011 10A SEV1011 16A |
 |
Denmark: | DEMKO |
 |
AFSNIT 10A |
 |
Jepang: | JET |
 |
JIS8303 1-15 7SEBUAH JIS8303 5-15 15SEBUAH JIS8303 L5-20 JIS8303 L5-30 JIS8303 L6-20 JIS8303 L6-30 |
 |
Eropa: | CE |
 |
CEE7/16 2.5A CEE7/7 16A |
 |
Jerman: | VDE |
 |
CEE7/4 16A |
 |
Perancis: | LCIE |
 |
CEE7/6 16A |
 |
Norway | NEMKO |
 |
Europe CEE7/7,CEE7/17,CEE1/7 Schuko |
 |
Finlandia | FIMKO |
 |
Europe CEE7/7,CEE7/17,CEE1/7 Schuko |
 |
Belgium | CEBEC |
 |
Europe CEE7/7,CEE7/17,CEE1/7 Schuko |
 |
United Kingdo | UNTUK TINGGAL |
 |
BS1363 13A |
 |
Argentina: | IRAM |
 |
IRAM2063 2.5A IRAM2073 10A IRAM2073 16A |
 |
Taiwan | BSMI |
 |
CNS10917 1-15 7SEBUAH CNS10917 5-15 7SEBUAH |
 |
Singapura | PSB SPRING |
 |
BS1363(SEBUAH) UK |
 |
Korea: | KTL |
 |
KSC8305 2.5A KSC8305 10A KSC8305 16A |
United States of America UL Safety Marks
Organisasi: UL Listed & UL Recognized
The UL Mark indicates that either Underwriters Laboratories or an equivalent nationally recognized testing laboratory (NRTL) has tested and determined that a product meets UL specified product safety requirements. This certification allows a manufacturer to show that their product is “UL Listed” using the familiar UL logo. In addition to certifying products to their safety specifications, UL also offers an assessment process to provide certification to many of the regional safety mark schemes worldwide, including those summarized below.
Note also that Underwriters Laboratories of Canada (ULC) is an independent product safety testing, certification, and inspection organization accredited by the Standards Council of Canada. It uses the above UL logos accompanied by the letter “C.”
Kabel Listrik NEMA
Electrical Plug Standards: Tipe A
USA Polarized NEMA 1-15P 2 Pin - 10 Amp
The USA Polarized NEMA 1-15 standar 2 Pin 10 amp non-grounded is the standard 2 wire wall receptacle found in the United States. Polarized has one blade flanged wider. Power cords manufactured in compliance with NEMA and IEC standards. UL and CSA approvals and certifications are available on the product specification page.
Electrical Plug Standards: Tipe A
USA Non-Polarized NEMA 1-15 2 Pin - 10 Amp
The USA Non-Polarized NEMA 1-15 standar 2 pin 10 amp non-grounded is the standard 2 wire wall receptacle found in the United States. Power cords manufactured in compliance with NEMA and IEC standards. UL and CSA approvals and certifications are available on the product specification page.
Electrical Plug Standards: Tipe B
USA Grounded NEMA 5-15 3 Pin - 15 Amp
The USA Grounded NEMA 5-15 standar 3 pin 15 amp is the standard 3 wire wall receptacle found in the United States. Power cords manufactured in compliance with NEMA and IEC standards. UL and CSA approvals and certifications are available on the product specification page.
Regional Safety Marks
Faktanya, we can also use the world map to more intuitively identify the power cord safety signs of each country, such as the Americas, Eropa & Asia.
The maps in the following section highlight some of the more notable safety marking schemes but are not all-inclusive. Tambahan, in Europe, there are other marks applicable in the Nordic countries and other central and eastern European countries such as Denmark, Swiss, Hungaria, Ukraina, and Belarus. Countries including Hong Kong and India operate their safety marks in Asia.
CSA Safety Marks – Canada
Organisasi: CSA & cUL Listed
The Canadian Standards Association operates the CSA marking scheme alongside UL certification to identify products acceptable in either Canada (C suffix letter) and the USA (US suffix).
cUL Listed Power Cords
Canada Non-Polarized NEMA 1-15 2 Pin - 10 Amp
The Canada Non-Polarized NEMA 1-15 standar 2 pin 10 amp non-grounded is the standard 2 wire wall receptacle found in the United States. Power cords manufactured in compliance with NEMA and IEC standards. cUL and CSA approvals and certifications are available on the product specification page.
Power Plug Standards: Tipe A
Canada Grounded NEMA 5-15 3 Pin - 15 Amp
Canada Grounded NEMA 5-15 standar 3 pin 15 amp is the standard 3 wire wall receptacle found in the United States. Power cords manufactured in compliance with NEMA and IEC standards. cUL and CSA approvals and certifications are available on the product specification page.
Power Plug Standards: Tipe B
NOM Safety Marks – Mexico
Organisasi: NOM-ANCE
The NOM Mark identifies compliance with Mexico’s “Normas Oficiales Mexicanas” (NOM) safety standards for household electrical appliances, IT, AV, and similar equipment. ANCE is an independent body authorized to grant NOM approval in electric and gas products.
TIDAK ADA 5-15 Kabel Listrik
Mexico Non-Polarized NEMA 1-15 2 Pin - 10 Amp
The Mexico Non-Polarized NEMA 1-15 standar 2 pin 10 amp non-grounded is the standard 2 wire wall receptacle found in the United States. Cords are manufactured in compliance with NEMA and IEC standards.NOM-ANCE approvals and certifications are available on the product specification page.
Power Plug Standards: Tipe A
Mexico Grounded NEMA 5-15 3 Pin - 15 Amp
Mexico Grounded NEMA 5-15 standar 3 pin 15 amp is the standard 3 wire wall receptacle found in the United States. Cords are manufactured in compliance with NEMA and IEC standards. NOM-ANCE approvals and certifications are available on the product specification page.
Power Plug Standards: Tipe B
INMETRO Safety Marks – Brazil
Organisasi: INMETRO & CSA
Certification of certain product groups, such as medical electrical equipment, ballasts, and equipment used in hazardous locations, is mandatory in Brazil, with accreditation indicated by the INMETRO Mark. The INMETRO Mark may also be used voluntarily to indicate safety standards compliance for products that are not mandated, misalnya, IT, audio/visual equipment, and home appliances.
Brazil Power Cords
Brazil NBR 6147 2 Cabang - 10 Amp
The Brazil NBR 6147 standar 2 cabang 10 amp non-grounded standard is new. Power cords manufactured in compliance with Brazilian NBR 6147 standar. INMETRO and CSA agency approvals and certifications are available on the product specification page.
Power Plug Standards: Tipe C
Brazil NBR 14136 3 Cabang - 10 Amp
The Brazil NBR 14136 standar 3 cabang 10 amp standard is new. Power cords manufactured in compliance with Brazilian NBR 14136 standar. INMETRO and CSA agency approvals and certifications are available on the product specification page.
Power Plug Standards: Ketik N
Brazil NBR 14136 3 Cabang - 16 Amp
The Brazil NBR 14136 standar 3 cabang 16 amp standard is new. Power cords manufactured in compliance with Brazilian NBR 14136 standar. INMETRO and CSA agency approvals and certifications are available on the product specification page.
Power Plug Standards: Ketik N
IRAM S Safety Mark – Argentina
Organisasi: IRAM S Mark or UL Argentina
Product certification to IEC-based standards is mandatory in Argentina under the auspices of its standards body IRAM with conformance indicated by the S Mark.
Argentina Power Cords
Argentina IRAM 2063 - 2.5 Amp
The Argentina IRAM 2063 standard is physically the same as Australia AS 3112 but the line blades are not insulated. Electrical cords are manufactured in compliance with IRAM standards. UL Argentina agency approvals and certifications are available on the product specification page.
Electrical Plug Standards: Tipe I
Argentina IRAM 2073 - 10 Amp
The Argentina IRAM 2073 standar 10 amp is physically the same as the China GB2099. Electrical cords are manufactured in compliance with IRAM standards. UL Argentina agency approvals and certifications are available on the product specification page.
Electrical Plug Standards: Tipe I
CE Safety Marks
What is a CE marking? A CE marking is a European marking of conformity that indicates that a product complies with the essential requirements of the applicable European laws or directives for safety, health, environment, and consumer protection. Generally, this conformity to the applicable directives is done through self-declaration. The CE marking is required on products in the European Economic Area (EEA) countries to facilitate trade between the member countries. The manufacturer or authorized representative established in the EEA is responsible for affixing the CE marking to his product. The CE marking provides a means for a manufacturer to demonstrate that his product complies with a standard set of laws required by all of the countries in the EEA to allow free movement of trade within the EEA countries.
Unlike the UL Safety Mark, the CE Safety Mark:
- It is not a safety certification mark.
- It is generally based on self-declaration rather than third party certification.
- Does not demonstrate compliance to North American safety standards or installation codes
A product that bears a CE marking may also reach a certification mark such as UL’s listing mark. Namun, the CE marking and the UL mark have no association. The UL Mark indicates compliance with the applicable safety requirements in North America and is evidence of UL certification, which is accepted by Model North American Installation Codes such as the National Electrical Code and the Canadian Electrical Code.
The CE marking on products is not a certification mark. AHJs should continue to look for the UL mark on products to determine if a product complies with applicable safety requirements for North America.
[Information courtesy of Underwriters Laboratories]
Tanda Keamanan - Eropa
Organisasi: ENEC
The ENEC Safety Marks is simply the mark used to denote compliance with the European Norm (EN) standards for all electrical product sectors, as tested by approved independent testing laboratories worldwide.
Europe Power Cords
Europe CEE7/16 2 Cabang - 2.5 Amp
The Europe CEE7/16 standard 2 cabang 2.5 amp is the standard 2 electrical wire plug for non-grounded applications in most areas of continental Europe. Power cables manufactured in compliance with European CEE7/16 standards, and ENEC agency approvals and certifications are available on the product specification page.
Power Plug Standards: Tipe C
Europe CEE7/7 Schuko 3 Cabang - 16 Amp
The Europe CEE7/7 standard 3 cabang 16 amp plug has both the side grounding clips of the Germany CEE7/4 receptacle and a female contact to accept the grounding pin of the France CEE7/5 receptacle. Power cables manufactured in compliance with European CEE7/7 standards. ENEC agency approvals and certifications are available on the product specification page.
Power Plug Standards: Type E/F
Nemko Mark - Norway
Organisasi: NEMKO
Nemko is an organization similar to TUV or UL that offers product safety testing and certification to worldwide standards. Its direct services cover IT/AV, household, and telecoms products but extend to other sectors such as medical equipment and the oil and gas industry. The mark itself signifies that Nemko has tested or certified the product according to national standards in Norway.
Type F Plug Power Cords
Norway Schuko CEE7/4 2 Cabang - 16 Amp
The Norway Schuko CEE7/4 standard 2 cabang 16 amp has side grounding clips. Power cables manufactured in compliance with European CEE7/4 standards. NEMKO agency approvals and certifications are available on the product specification page.
Power Plug Standards: Tipe F
EAC Safety Mark – Russia
Organisasi: EAC
The Eurasian Conformity (EAC) mark has replaced the previous GOST-R and PCT national certification standards and marks. This mark is used to indicate products that meet all of the technical requirements of the Eurasian Customs Union.
Type C Plug Power Cords
Russia GOST 7396 3 Cabang - 16 Amp
The Russia GOST 7396 standar 3 cabang 16 amp contacts 4.0mm as opposed to the 4.8mm contacts of other European plugs and receptacles. As such, a Russia GOST 7396 receptacle may not accept the larger contacts found on Europe CEE7/4, CEE7/7, and CEE7/16 plugs. Power cables manufactured in compliance with Russian GOST 7396 standar. EAC agency approvals and certifications are available on the product specification page.
Power Plug Standards: Tipe C
GS, DIN, and VDE Safety Marks – Germany/EU
Organisasi: TUV, VDE
Germany’s TUV standards agency operates the GS Mark (Geprüfte Sicherheit = tested safety) to show conformity with German’s Equipment and Product Safety Act (GPSG = Geräte- und Produktisicherheitgesetz). The GS Mark assures commercial buyers and consumers the product has been tested by an authorized institution such as TUV Rheinland. The DIN Mark is another marking scheme operated by TUV Rheinland certifying component compliance with DIN, EN, KIE, and ISO product safety standards.
The VDE Testing and Certification Institute is another German-based independent testing organization for electrical and electronic products. The VDE Mark indicates conformity with the VDE standards, European or internationally harmonized standards, and confirms compliance with protective requirements of the applicable EC Directive(s).
Type F Plug Power Cords
Jerman Schuko CEE7/4 2 Cabang- 16 Amp
Jerman dan Spanyol menggunakan standar Schuko CEE7/4 2 cabang 16 amp, which has side grounding clips. Power cables manufactured in compliance with European CEE7/4 standards. Persetujuan dan sertifikasi agensi VDE tersedia di halaman spesifikasi produk.
Power Plug Standards: Tipe F
BSI Kitemark - U.K.
Organisasi: UNTUK TINGGAL
Institusi Standar Inggris (BSI) adalah badan standar nasional pertama di dunia dan terus menjadi pembuat standar global terkemuka. BSI is also the U.K.’s National Standards Body, representing U.K. interests worldwide. Kitemark BSI adalah tanda sertifikasi sukarela, diakui secara global sebagai simbol kepercayaan, that shows a product or service meets applicable and appropriate British, Eropa, Internasional, and other standards for quality, keamanan, pertunjukan, and trust.
Type G Plug/U.K. Kabel Listrik
UK BS1363 3 Pin - 13 Amp
The UK BS1363 standard 3 pin 13 amp typically has a 13 amp fused plug and is used throughout the United Kingdom. The BS1363 replaced the old British BS 546 standar, which is no longer used in the U.K. but is still widely used in India and South Africa. Power cables manufactured in compliance with UK BS 1363 standar. ASTA agency approvals and certifications are available on the product specification page.
Power Plug Standards: Tipe G
Safety Marking Schemes
Understanding the complexities and subtle differences between various standards and marking schemes can be daunting. This application note aims to identify the major standards that relate to power supply cord safety, the agencies that administer them and/or provide certification, and the marking schemes that can be used to show compliance.
DENAN PSE Safety Marks – Japan
Organisasi: JET
The PSE Mark is used to comply with Japan’s Electrical Appliance and Material Safety Law (DENAN) as applied to various classes of products and equipment.
Japan Power Cords
Japan JIS C 8303 Kelas I 3 Cabang - 15 Amp
The Japan JIS C 8303 class I standard 3 cabang 15 amp grounded appears to be physically identical to the NEMA 5-15 found in North America. In many cases, a North American plug will mate with Japan receptacles without an adapter. Namun, the Japan standard holds tighter dimensional measurements than North America, which means that North American plugs will not quite fit into Japan receptacles in some cases. Power cords manufactured in compliance with Japanese JIS C 8303 standards and PSE agency approvals and certifications are available on the product specification page.
Power Plug Standards: Tipe B
Japan JIS C 8303 Kelas II 2 Cabang - 15 Amp
The Japan JIS C 8303 class II standard 2 cabang 15 amp non-grounded appears to be physically identical to the NEMA 1-15 found in North America. In many cases, a North American plug will mate with Japan receptacles without an adapter. Namun, the Japan standard holds to tighter dimensional standards than North America, which means that North American plugs will not quite fit into Japan receptacles in some cases. Power cords manufactured in compliance with Japanese JIS C 8303 standar. PSE agency approvals and certifications are available on the product specification page.
Electrical Plug Standards: Tipe A
KC Mark – Korea
Organisasi: KTL
Korea’s KC Mark is administered by its Agency for Technology and Standards (KATS) to show compliance for mandated products with the Electrical Appliances and Materials Safety Control Law. It replaced the original EK mark.
Korea Power Cords
Korea KS C 8305 2 Cabang - 2.5 amp
The Korea KS C 8305 standar 2 cabang 2.5 amp non-grounded is physically the same as the Europe CEE7/16. Power cords manufactured in compliance with Korean KS C 8305 standards and KTL agency approvals and certifications are available on the product specification page.
Power Plug Standards: Tipe C
Korea KS C 8305 3 Cabang - 16 Amp
The Korea KS C 8305 standar 3 cabang 16 amp is physically the same as the Europe CEE7/7. Power cords manufactured in compliance with Korean KS C 8305 standards and KTL agency approvals and certifications are available on the product specification page.
Power Plug Standards: Tipe F
BSMI Mark – Taiwan
Organisasi: BSMI
The BSMI (Bureau of Standards, Metrology, and Inspection) Certification is the approval scheme for Taiwan’s ITE and audio/ video products.
Type A/B Plug Power Cords
Taiwan CNS10917 2 Cabang - 15 Amp
The Taiwan CNS10917 standard 2 cabang 15 amp non-grounded appears to be physically identical to the NEMA 1-15 found in North America. In many cases, a North American plug will mate with Taiwanese receptacles without an adapter. Namun, the Taiwanese standard holds to tighter dimensional standards than North America. This means that North American plugs will not quite fit into Taiwanese receptacles in some cases. Power cords manufactured in compliance with Taiwanese CNS 10917 standar. BSMI agency approvals and certifications are available on the product specification page.
Power Plug Standards: Tipe A
Taiwan CNS10917 3 Cabang - 15 Amp
The Taiwan CNS10917 standard 3 cabang 15 amp grounded appears to be physically identical to the NEMA 5-15 found in North America. In many cases, a North American plug will mate with Taiwanese receptacles without an adapter. Namun, the Taiwanese standard holds tighter dimensional measurements than North America. This means that North American plugs will not quite fit into Taiwanese receptacles in some cases. Power cords manufactured in compliance with Taiwanese CNS 10917 standar. BSMI agency approvals and certifications are available on the product specification page.
Power Plug Standards: Tipe B
CCC Safety Marks – China
Organisasi: CCC
The CCC (China Compulsory Certificate) Mark indicates compliance with Chinese laws and regulations and, as its name implies, is compulsory for any product used for commercial purposes in China.
China Power Cords
China GB1002 and GB2099 2 Pin - 15 Amp
The China GB1002 and GB2099 standard 2 pin 15 amp non-grounded appear to be physically identical to the NEMA 1-15 found in North America. In many cases, a North American plug will mate with China receptacles without an adapter. Namun, the China standard holds tighter dimensional measurements than North America, meaning North American plugs will not quite fit into China receptacles in some cases. Power cords manufactured in compliance with Chinese GB 2099 standar. CCC agency approvals and certifications are available on the product specification page.
Power Plug Standards: Tipe A
China GB2099 3 Pin - 10 Amp
The China GB2099 standard 3 pin 10 amp is physically the same as the Argentina IRAM 2073. Power cords manufactured in compliance with Chinese GB 2099 standards and CCC agency approvals and certifications are available on the product specification page.
Power Plug Standards: Tipe I
China GB2099 3 Pin - 16 Amp
The China GB2099 standard 3 pin 16 amp version has a broader grounding blade and may not be inserted in a 10 Amp receptacle. Power cords manufactured in compliance with Chinese GB 2099 standards and CCC agency approvals and certifications are available on the product specification page.
Power Plug Standards: Tipe I
PSB ‘SAFETY’ Mark – Singapore
Organisasi: PSB SPRING
Singapore’s safety authority, the Productivity and Standards Board (PSB), requires all controlled goods to be individually marked with the SAFETY Mark.
Type G Plug Power Cords
Singapore SS 145 3 Pin- 13 Amp
The Singapore SS 145 standar 3 pin 13 amp typically has a 13 amp fused plug and is used throughout the United Kingdom. The BS 1363A replaced the old Singapore BS 546 standar, which is no longer used in the U.K. but is still widely used in India and South Africa. Power cords manufactured in compliance with Singapore SS145/a standards. PSB agency approvals and certifications are available on the product specification page.
Power Plug Standards: Tipe G
RCM Tick Safety Marks– Australia
Organisasi: Tanda SAA
Australia memiliki badan standar nasional, Standar Australia, covering many different industry sectors including Electrotechnology and Energy, yang mencakup peralatan dan peralatan listrik/elektronik dengan standar keselamatan yang relevan. Tanda Kepatuhan Peraturan Australia (RCM) now consolidates the previously separate C-Tick, A-Tick, dan tanda RCM, effective from March 2013.
Australia AS/NZS 3112 2 Pin - 2.5 Amp
The Australia and New Zealand AS/NZS 3112 standar 2 pin 2.5 amp non-ground are physically the same as the Argentina IRAM 2073 but the line blades are insulated. Power cords are manufactured in compliance with Australian AS 3112 standar. SAA agency approvals and certifications are available on the product specification page.
Electrical Plug Standards: Tipe I
Australia AS/NZS 3112 3 Pin - 10 Amp
The Australia and New Zealand AS/NZS 3112 standar 3 pin 10 amp are physically the same as the Argentina IRAM 2073 and the China GB2099 but the line blades are insulated. Power cords are manufactured in compliance with Australian AS 3112 standar. SAA agency approvals and certifications are available on the product specification page.
Electrical Plug Standards: Tipe I
Australia AS/NZS 3112 3 Pin - 15 Amp
The Australia and New Zealand AS/NZS 3112 standar 3 pin 15 amp version has a wider grounding blade and may not be inserted in a 10 Amp receptacle. Power cords are manufactured in compliance with Australian AS 3112 standar. SAA agency approvals and certifications are available on the product specification page.
Except the above section highlights some of the more notable safety marking schemes, the following are other remaining International power cords approvals & regulations.
Electrical Plug Standards: Tipe I
Kabel Listrik Internasional
Austria Power Cords
Organisasi: OVE
Austria Schuko CEE7/4 2 Cabang - 16 Amp
The Austria Schuko CEE7/4 standard 2 cabang 16 amp which has side grounding clips. Power cables manufactured in compliance with European CEE7/4 standards. OVE agency approvals and certifications are available on the product specification page. IEC Tipe F
Electrical Plug Standards: Tipe F
Type E Plug Power Cords
Organisasi: CEBEC
Belgium Schuko CEE7/6 3 Cabang - 16 Amp
The Belgium Schuko CEE7/5 standard 3 Prong wall receptacle has a round male pin for grounding. Power cables manufactured in compliance with European CEE7/6 standards and CEBEC agency approvals and certifications are available on the product specification page.
Electrical Plug Standards: Tipe E
Type K Plug Power Cords
Organisasi: DEMKO
Denmark AFSNIT 107-2-D1 3 Cabang - 13 Amp
The Denmark AFSNIT 107-2-D1 standard 3 cabang 13 amp is also referred to as SRAF 1962/DB 16/87. Power cords manufactured in compliance with Denmark AFSNIT 107-2-D1 standards. DEMKO agency approvals and certifications are available on the product specification page.
Electrical Plug Standards: Ketik K
Type F Plug Power Cables
Organisasi: FIMKO
Finland Schuko CEE7/4 2 Cabang - 16 Amp
The Finland Schuko CEE7/4 standard 2 cabang 16 amp has side grounding clips. Power cables manufactured in compliance with European CEE7/4 standards. FIMKO agency approvals and certifications are available on the product specification page.
Electrical Plug Standards: Tipe F
Type E Plug Power Cables
Organisasi: LCIE
France Schuko CEE7/6 3 Cabang -16 Amp
France and Belgium use the Schuko CEE7/5 standard 3 Prong wall receptacle, which has a round male pin for grounding. Power cables manufactured in compliance with European CEE7/6 standards. LCIE agency approvals and certifications are available on the product specification page.
Electrical Plug Standards: Tipe F
Italy Power Cords
Organisasi: soket yang sangat umum digunakan yang menerima colokan C serta gaya colokan L
Italy CEI 23-50 3 Cabang - 10 Amp
soket yang sangat umum digunakan yang menerima colokan C serta gaya colokan L 23-50 standar 3 cabang 10 soket yang sangat umum digunakan yang menerima colokan C serta gaya colokan L. Kabel daya diproduksi sesuai dengan CEI Italia 23-50 standar. Kabel daya diproduksi sesuai dengan CEI Italia.
Electrical Plug Standards: Tipe L
Italy CEI 23-50 3 Cabang - 16 Amp
soket yang sangat umum digunakan yang menerima colokan C serta gaya colokan L 23-50 standar 3 cabang 16 amp version has wider line blades and may not be inserted in a 10 Amp receptacle. CEI agency approvals and certifications are available on the product specification page.
Electrical Plug Standards: Tipe L
Type F Power Cables
Organisasi: SEMKO
Sweden Schuko CEE7/4 2 Cabang - 16 Amp
The Sweden Schuko CEE7/4 standard 2 cabang 16 amp has side grounding clips. Power cables manufactured in compliance with European CEE7/4 standards. SEMKO agency approvals and certifications are available on the product specification page.
Electrical Plug Standards: Tipe F
Swiss Power Cords
Organisasi: ANDA (SEV)
Switzerland SEV 1011 3 Cabang - 10 Amp
Swiss SEV 1011 standar 3 cabang 10 amp juga akan menerima Europlug CEE7/16. Namun, koneksi tidak akan di-ground. Kabel daya diproduksi sesuai dengan Swiss SEV 1011 standar. Persetujuan dan sertifikasi agensi ETI tersedia di halaman spesifikasi produk.
Electrical Plug Standards: Ketik J
Switzerland SEV 1011 3 Cabang - 16 Amp
Switzerland SEV 1011 standar 3 cabang 16 amp version has a broader line blade and may not be inserted in a 10 Amp receptacle. Kabel daya diproduksi sesuai dengan Swiss SEV 1011 standar. Persetujuan dan sertifikasi agensi ETI tersedia di halaman spesifikasi produk.
Electrical Plug Standards: Ketik J
Kabel Listrik Eropa
Organisasi: KEMA
Netherlands Schuko CEE7/4 2 Cabang - 16 Amp
The Netherlands Schuko CEE7/4 standard 2 cabang 16 amp has side grounding clips. Power cords manufactured in compliance with European CEE7/4 standards. KEMA agency approvals and certifications are available on the product specification page.
Electrical Plug Standards: Tipe F
Israel Power Cords
Organisasi: MEMBERI
Israel SI-32 2 Cabang - 2.5 Amp
Standar SI-32 Israel 2 cabang 2.5 amp is physically the same as the Europlug. Kabel daya yang diproduksi sesuai dengan standar SI32 Israel serta persetujuan dan sertifikasi lembaga SII tersedia di halaman spesifikasi produk.
Electrical Plug Standards: Tipe C
Israel SI-32 3 Cabang - 16 Amp
Standar SI-32 Israel 3 cabang 16 amp menggunakan cabang tengah sebagai ground. Kabel daya yang diproduksi sesuai dengan standar SI32 Israel serta persetujuan dan sertifikasi lembaga SII tersedia di halaman spesifikasi produk.
Electrical Plug Standards: Ketik H
India Power Cords
Organisasi: BIS
India IA6A3 3 Cabang - 6 Amp (Small)
The India IS694 and IA6A3 standard 3 cabang 6 amp (IS1293 and BS546) replaced Old British standard BS 546 6amp. Power cords manufactured in compliance with Indian IA16A3 standards, aka Old English BS546. BIS agency approvals and certifications are available on the product specification page.
Electrical Plug Standards: Tipe D
India IA16A3 3 Cabang - 16 Amp (Large)
The India IS694 and IA16A3 standard (aka IS1293 and BS546) 3 cabang 16 amp is the same as the South Africa SANS 164-1. Power cords manufactured in compliance with Indian IA16A3 standards, aka Old English BS546. BIS agency approvals and certifications are available on the product specification page.
Electrical Plug Standards: Ketik M
South Africa Power Cords
Organisasi: SABS
South Africa SANS 164-3 (alias BS546) 3 Cabang - 6 Amp (Small)
SANS Afrika Selatan 164-3 (BS546) standar 3 cabang 6 amp menggantikan BS standar Inggris Kuno 546 6amp. Kabel daya diproduksi sesuai dengan SABS Afrika Selatan 164-3 standar, BS546 Inggris Kuno. Persetujuan dan sertifikasi agen SABS tersedia di halaman spesifikasi produk.
Electrical Plug Standards: Tipe D
South Africa SANS 164-1 (alias BS546) 3 Cabang - 16 Amp (Large)
SANS Afrika Selatan 164-1 (alias BS546) standar 3 cabang 16 amp sama dengan IS India 1293 IA16A3. Kabel daya diproduksi sesuai dengan SABS Afrika Selatan 164-1 standard Old English BS546. Persetujuan dan sertifikasi agen SABS tersedia di halaman spesifikasi produk.
Electrical Plug Standards: Ketik M
Type G Plug Power Cables
Organisasi: SASO
Saudi Arabia SASO 2203 3 Pin - 13 Amp
The Saudi Arabia SASO 2203 standar 3 pin 13 amp typically has a 13 amp fused plug throughout the United Kingdom. The BS 1363A replaced the old Saudi Arabia BS 546 standar, which is no longer used in the U.K. but is still widely used in India and South Africa. Power Cables manufactured in compliance with Saudi SASO 2203 standar. ASTA agency approvals and certifications are available on the product specification page.
Electrical Plug Standards: Tipe G
SUMMARY
Despite efforts within Europe, North America, and elsewhere to bring about harmonization of safety standards for electrical equipment, including power cords, there are still many different regulations, testing, and certification procedures that may need to be taken into account to meet legislative requirements in the various territories where such equipment will be sold. Understanding all of these is a challenge. This application notes that the article presents a reasonably comprehensive overview of the various standards, agencies, and safety marks as a definitive guide for power cords.
DCpowercord is China’s leading produsen kabel listrik. It follows best practices to ensure its power cords meet the highest levels of safety and performance, offering products approved to standards such as UL, CE, and SAA while also providing quality solutions utilize the latest in efficient green power technology.
For more information on regulatory and compliance topics, you can search on our website resource content.
DAPATKAN PENAWARAN GRATIS UNTUK PROYEK ANDA
Tim kami siap mendukung proyek Anda selanjutnya, jadi hubungi kami hari ini!
