hōʻailona DCpowercord

Fundamentals:What specifications are available for power cords

This article focuses on :Specifications power cords

A power line is a cable that brings electric present. Typically the current is transmitted in a point-to-point fashion. Power cords can be separated right into air conditioner power cords as well as DC power cords according to their use. Normally air conditioner power cables are cables that pass through greater voltages of alternating present, which call for unified criteria to get safety certification before they can be formally produced. .

The DC line is essentially via the lower voltage DC, so the safety and security needs are not as strict as the air conditioning line, specifications power cords but also for security reasons, nations still require unified security accreditation.

specifications power cords

specifications power cords

The performance indications of twisted pair wires in power line

For twisted set cable televisions, the customer is most interested in several signs that qualify their efficiency. These indications consist of attenuation, near-end crosstalk, insusceptibility features, distributed capacitance, DC resistance, etc.

What are the requirements of the power cord

(1) Depletion

(2) Near-end crosstalk

As the signal frequency boosts, it ends up being more difficult to determine. NEXT does not suggest the amount of crosstalk produced at the near end point, however only the quantity of crosstalk measured at the close to end point. This value differs with the size of the cable, the longer the cable television, the smaller sized the worth ends up being.

At the same time the signal at the transmitter end is undermined and also the crosstalk to other sets comes to be reasonably little. Experiments have actually revealed that the NEXT is just reasonable when measured within 40 metres. If the various other end is further than 40 metres from the info outlet, then there is a degree of crosstalk, which may not be gauged by the tester. Therefore, it is best to gauge NEXT at both ends. Today’s testers are outfitted to ensure that the NEXT worth at both ends can be determined at one end of the web link.

(3) DC resistance

(4) Characteristic insusceptibility

(5) depletion crosstalk proportion (ACR)

(6) Wire features


If the SNR is too low, the data signal is obtained as though the receiver can not compare the information signal as well as the sound signal, which inevitably causes data errors. For that reason, in order to limit the information errors to a particular variety,.

A minimal appropriate SNR has to be specified.
specifications power cords Commonly made use of cord sizes for residential setups are: 1, 1.5, 2.5, 4, 6, 10, 16, 25, 35, 50, 70, 95, 120, 150, 185, 240, 300, 400, 500 mm ².
Eia kekahi: e.g.
VV4X16MM2 is PVC protected, PVC encased copper core cable, 4 cores, 16 square each.
BV1X95MM is a PVC protected copper core cable with a random sample of 95 sq. mm.


RVV3X2.5 MM2Normally R is added to the back to stand formulti-core flexible cord”, and the one contributed to the front is usuallyZR”, standing for fire resistant.

VV is polyvinyl chloride protected, PVC covered wire.
BV is flat polyvinyl chloride sheathed cord.
RVV is a polyvinyl chloride protected, polyvinyl chloride sheathed versatile wire.
The last represents the severe cross-sectional location of numerous copper wires.


Normally copper core cord by 1mm2 can pass 4 ~ 6A current calculation, that is, 1mm2 can pass 5A current, that is, 1.1 kilowatts, and more; as a whole, the a/c hanging equipment with 2.5, closet maker with 4, lighting on the line with 1.

He loea ʻo DCpowercord nā mea hana kaula mana. Our engineers will answer if you have any questions about the power cords. Please contact us directly!

Kaila Youtube DCpowercord

Kaʻana like i kēia pou

Logo palapala hōʻoia VDE

inoa mea kūʻai

16 AWG NEMA 5-15P i NEMA 5-15R Mana hoʻonui kaula

inoa mea kūʻai

inoa mea kūʻai

LOGO-330

Tlak i kahi loea

Kūkākūkā i nā koi no kāu papahana