Major Safety Standards & Safety Marks
The International Electrotechnical Commission (IEC) and the associated International Organization for Standardization (ISO) are the principal agencies responsible for electrical safety standards. Agencies such as Underwriters Laboratories (جي) and Canadian Standards Association (CSA) provide certification in North America. At the same time, similar bodies in Europe are Verband der Elektrotechnik (VDE), Technischer Überwachungs-Verein (TUV), and British Standards Institution (BSI). A product meeting an IEC standard such as IEC 60950 or the newer 62368-1 standard may be identified with the standard’s number prefixed instead by UL, CSA, or EN (European Norm) to indicate the country where it is certified, مثال, جي 60950 or EN 62368-1. Standards like these with the same numbers but different prefixes are sometimes referred to as “harmonized standards”. But while the IEC continues to pursue harmonization, regional differences remain, and consequently, products intended for multiple markets will need to show all of the required certifications.
Specific information of Power Cord Safety Marks
حفاظتي نشان | ||||
Image | Plug Type | Approvals | Description | |
Americas | جي (Underwriters Laboratories) |
NEMA 1-15 NEMA 5-15 or L5-15 NEMA 5-20 or L5-20 NEMA 5-30 or L5-30 NEMA 6-15 or L6-15 NEMA 6-20 or L6-20 NEMA 6-30 or L6-30 NEMA 5-50 NEMA 6-50 NEMA 14-30 or L14-30 NEMA 14-50 NEMA 15-30 or L15-30 NEMA 15-50 NEMA L14-20 NEMA L15-20 NEMA L21-20 NEMA L22-20 NEMA L23-20 NEMA L18-30 NEMA L19-30 NEMA L20-30 NEMA L21-30 NEMA L22-30 NEMA L23-30 |
||
ڪينيڊا | CSA (Canada Standards Association) | CSA (Canada Standards Association) | ||
آسٽريليا: | SAA Mark |
AS3112 2.5A
AS3112 10AAS3112 15A
|
||
انڊيا: | STQC |
IS6A3 6A IS16A3 16A |
||
روس: | GOST |
GOST 7396 2.5اي GOST 7396 16اي |
||
برازيل: | Inmetro |
NBR6147 2.5A NBR14136 10A NBR14136 16A |
||
Israel: | ڏيو |
CEE7/16 2.5A CEE7/7 16A |
||
ڏکڻ آفريڪا | SABS |
SANS 164-3 6اي SANS 164-1 16اي |
||
Saudi Arabia | SASO | SABS 164-1, BS546 | ||
چين: | سي سي سي |
GB1002 2.5A GB2099 10A GB2099 16A |
||
اٽلي: | IMQ |
CEI23-16 10A CEI23-16 16A |
||
Switzerland: | ESTI - Federal Inspectorate For Heavy Current Installations, (formerly SEV) |
SEV1011 10A SEV1011 16A |
||
ڊينمارڪ: | DEMKO | AFSNIT 10A | ||
جاپان: | JET |
JIS8303 1-15 7اي JIS8303 5-15 15اي JIS8303 L5-20 JIS8303 L5-30 JIS8303 L6-20 JIS8303 L6-30 |
||
يورپ: | CE |
CEE7/16 2.5A CEE7/7 16A |
||
Germany: | VDE | CEE7/4 16A | ||
فرانس: | LCIE | CEE7/6 16A | ||
ناروي | NEMKO | Europe CEE7/7,CEE7/17,CEE1/7 Schuko | ||
فنلينڊ | FIMKO | Europe CEE7/7,CEE7/17,CEE1/7 Schuko | ||
بيلجيم | CEBEC | Europe CEE7/7,CEE7/17,CEE1/7 Schuko | ||
United Kingdo | ASTA | BS1363 13A | ||
Argentina: | IRAM |
IRAM2063 2.5A IRAM2073 10A IRAM2073 16A |
||
Taiwan | BSMI |
CNS10917 1-15 7اي CNS10917 5-15 7اي |
||
سينگاپور | PSB SPRING | BS1363(اي) UK | ||
Korea: | KTL |
KSC8305 2.5A KSC8305 10A KSC8305 16A |
United States of America UL Safety Marks
تنظيم: UL Listed & UL Recognized
The UL Mark indicates that either Underwriters Laboratories or an equivalent nationally recognized testing laboratory (NRTL) has tested and determined that a product meets UL specified product safety requirements. This certification allows a manufacturer to show that their product is “UL Listed” using the familiar UL logo. In addition to certifying products to their safety specifications, UL also offers an assessment process to provide certification to many of the regional safety mark schemes worldwide, including those summarized below.
Note also that Underwriters Laboratories of Canada (ULC) is an independent product safety testing, سرٽيفڪيشن, and inspection organization accredited by the Standards Council of Canada. It uses the above UL logos accompanied by the letter “C.”
NEMA پاور تار
Electrical Plug Standards: قسم اي آئوٽليٽ
USA Polarized NEMA 1-15P 2 Pin - 10 Amp
The USA Polarized NEMA 1-15 standard 2 Pin 10 amp non-grounded is the standard 2 wire wall receptacle found in the United States. Polarized has one blade flanged wider. Power cords manufactured in compliance with NEMA and IEC standards. UL and CSA approvals and certifications are available on the product specification page.
Electrical Plug Standards: قسم اي آئوٽليٽ
USA Non-Polarized NEMA 1-15 2 Pin - 10 Amp
The USA Non-Polarized NEMA 1-15 standard 2 pins 10 amp non-grounded is the standard 2 wire wall receptacle found in the United States. Power cords manufactured in compliance with NEMA and IEC standards. UL and CSA approvals and certifications are available on the product specification page.
Electrical Plug Standards: قسم اي آئوٽليٽ
USA Grounded NEMA 5-15 3 Pin - 15 Amp
The USA Grounded NEMA 5-15 standard 3 پن 15 amp is the standard 3 wire wall receptacle found in the United States. Power cords manufactured in compliance with NEMA and IEC standards. UL and CSA approvals and certifications are available on the product specification page.
Regional Safety Marks
In fact, we can also use the world map to more intuitively identify the power cord safety signs of each country, such as the Americas, يورپ & Asia.
The maps in the following section highlight some of the more notable safety marking schemes but are not all-inclusive. In addition, in Europe, there are other marks applicable in the Nordic countries and other central and eastern European countries such as Denmark, Switzerland, هنگري, Ukraine, and Belarus. Countries including Hong Kong and India operate their safety marks in Asia.
CSA Safety Marks – Canada
تنظيم: CSA & cUL Listed
The Canadian Standards Association operates the CSA marking scheme alongside UL certification to identify products acceptable in either Canada (C suffix letter) and the USA (US suffix).
cUL Listed Power Cords
Canada Non-Polarized NEMA 1-15 2 Pin - 10 Amp
The Canada Non-Polarized NEMA 1-15 standard 2 پن 10 amp non-grounded is the standard 2 wire wall receptacle found in the United States. Power cords manufactured in compliance with NEMA and IEC standards. cUL and CSA approvals and certifications are available on the product specification page.
Power Plug Standards: قسم اي آئوٽليٽ
Canada Grounded NEMA 5-15 3 Pin - 15 Amp
Canada Grounded NEMA 5-15 standard 3 پن 15 amp is the standard 3 wire wall receptacle found in the United States. Power cords manufactured in compliance with NEMA and IEC standards. cUL and CSA approvals and certifications are available on the product specification page.
Power Plug Standards: قسم اي آئوٽليٽ
NOM Safety Marks – Mexico
تنظيم: NOM-ANCE
The NOM Mark identifies compliance with Mexico’s “Normas Oficiales Mexicanas” (NOM) safety standards for household electrical appliances, IT, AV, and similar equipment. ANCE is an independent body authorized to grant NOM approval in electric and gas products.
NEMA 5-15 پاور تار
Mexico Non-Polarized NEMA 1-15 2 Pin - 10 Amp
The Mexico Non-Polarized NEMA 1-15 standard 2 پن 10 amp non-grounded is the standard 2 wire wall receptacle found in the United States. Cords are manufactured in compliance with NEMA and IEC standards.NOM-ANCE approvals and certifications are available on the product specification page.
Power Plug Standards: قسم اي آئوٽليٽ
Mexico Grounded NEMA 5-15 3 Pin - 15 Amp
Mexico Grounded NEMA 5-15 standard 3 پن 15 amp is the standard 3 wire wall receptacle found in the United States. Cords are manufactured in compliance with NEMA and IEC standards. NOM-ANCE approvals and certifications are available on the product specification page.
Power Plug Standards: قسم اي آئوٽليٽ
INMETRO Safety Marks – Brazil
تنظيم: INMETRO & CSA
Certification of certain product groups, such as medical electrical equipment, ballasts, and equipment used in hazardous locations, is mandatory in Brazil, with accreditation indicated by the INMETRO Mark. The INMETRO Mark may also be used voluntarily to indicate safety standards compliance for products that are not mandated, مثال, IT, audio/visual equipment, and home appliances.
Brazil Power Cords
Brazil NBR 6147 2 Prong - 10 Amp
The Brazil NBR 6147 standard 2 پرنگ 10 amp non-grounded standard is new. Power cords manufactured in compliance with Brazilian NBR 6147 standards. INMETRO and CSA agency approvals and certifications are available on the product specification page.
Power Plug Standards: قسم اي آئوٽليٽ
Brazil NBR 14136 3 Prong - 10 Amp
The Brazil NBR 14136 standard 3 پرنگ 10 amp standard is new. Power cords manufactured in compliance with Brazilian NBR 14136 standards. INMETRO and CSA agency approvals and certifications are available on the product specification page.
Power Plug Standards: قسم اين
Brazil NBR 14136 3 Prong - 16 Amp
The Brazil NBR 14136 standard 3 پرنگ 16 amp standard is new. Power cords manufactured in compliance with Brazilian NBR 14136 standards. INMETRO and CSA agency approvals and certifications are available on the product specification page.
Power Plug Standards: قسم اين
IRAM S Safety Mark – Argentina
تنظيم: IRAM S Mark or UL Argentina
Product certification to IEC-based standards is mandatory in Argentina under the auspices of its standards body IRAM with conformance indicated by the S Mark.
Argentina Power Cords
Argentina IRAM 2063 - 2.5 Amp
The Argentina IRAM 2063 standard is physically the same as Australia AS 3112 but the line blades are not insulated. Electrical cords are manufactured in compliance with IRAM standards. UL Argentina agency approvals and certifications are available on the product specification page.
Electrical Plug Standards: Type I
Argentina IRAM 2073 - 10 Amp
The Argentina IRAM 2073 standard 10 amp is physically the same as the China GB2099. Electrical cords are manufactured in compliance with IRAM standards. UL Argentina agency approvals and certifications are available on the product specification page.
Electrical Plug Standards: Type I
CE Safety Marks
What is a CE marking? A CE marking is a European marking of conformity that indicates that a product complies with the essential requirements of the applicable European laws or directives for safety, health, environment, and consumer protection. Generally, this conformity to the applicable directives is done through self-declaration. The CE marking is required on products in the European Economic Area (EEA) countries to facilitate trade between the member countries. The manufacturer or authorized representative established in the EEA is responsible for affixing the CE marking to his product. The CE marking provides a means for a manufacturer to demonstrate that his product complies with a standard set of laws required by all of the countries in the EEA to allow free movement of trade within the EEA countries.
Unlike the UL Safety Mark, the CE Safety Mark:
- It is not a safety certification mark.
- It is generally based on self-declaration rather than third party certification.
- Does not demonstrate compliance to North American safety standards or installation codes
A product that bears a CE marking may also reach a certification mark such as UL’s listing mark. قسم اي آئوٽليٽ, the CE marking and the UL mark have no association. The UL Mark indicates compliance with the applicable safety requirements in North America and is evidence of UL certification, which is accepted by Model North American Installation Codes such as the National Electrical Code and the Canadian Electrical Code.
The CE marking on products is not a certification mark. AHJs should continue to look for the UL mark on products to determine if a product complies with applicable safety requirements for North America.
[Information courtesy of Underwriters Laboratories]
حفاظتي نشان - يورپ
تنظيم: ENEC
The ENEC Safety Marks is simply the mark used to denote compliance with the European Norm (EN) standards for all electrical product sectors, as tested by approved independent testing laboratories worldwide.
Europe Power Cords
Europe CEE7/16 2 Prong - 2.5 Amp
The Europe CEE7/16 standard 2 پرنگ 2.5 amp is the standard 2 electrical wire plug for non-grounded applications in most areas of continental Europe. Power cables manufactured in compliance with European CEE7/16 standards, and ENEC agency approvals and certifications are available on the product specification page.
Power Plug Standards: قسم اي آئوٽليٽ
Europe CEE7/7 Schuko 3 Prong - 16 Amp
The Europe CEE7/7 standard 3 پرنگ 16 amp plug has both the side grounding clips of the Germany CEE7/4 receptacle and a female contact to accept the grounding pin of the France CEE7/5 receptacle. Power cables manufactured in compliance with European CEE7/7 standards. ENEC agency approvals and certifications are available on the product specification page.
Power Plug Standards: Type E/F
Nemko Mark - ناروي
تنظيم: NEMKO
Nemko is an organization similar to TUV or UL that offers product safety testing and certification to worldwide standards. Its direct services cover IT/AV, household, and telecoms products but extend to other sectors such as medical equipment and the oil and gas industry. The mark itself signifies that Nemko has tested or certified the product according to national standards in Norway.
Type F Plug Power Cords
Norway Schuko CEE7/4 2 Prong - 16 Amp
The Norway Schuko CEE7/4 standard 2 پرنگ 16 amp has side grounding clips. Power cables manufactured in compliance with European CEE7/4 standards. NEMKO agency approvals and certifications are available on the product specification page.
Power Plug Standards: قسم اي آئوٽليٽ
EAC Safety Mark – Russia
تنظيم: EAC
The Eurasian Conformity (EAC) mark has replaced the previous GOST-R and PCT national certification standards and marks. This mark is used to indicate products that meet all of the technical requirements of the Eurasian Customs Union.
Type C Plug Power Cords
Russia GOST 7396 3 Prong - 16 Amp
The Russia GOST 7396 standard 3 پرنگ 16 amp contacts 4.0mm as opposed to the 4.8mm contacts of other European plugs and receptacles. As such, a Russia GOST 7396 receptacle may not accept the larger contacts found on Europe CEE7/4, CEE7/7, and CEE7/16 plugs. Power cables manufactured in compliance with Russian GOST 7396 standards. EAC agency approvals and certifications are available on the product specification page.
Power Plug Standards: قسم اي آئوٽليٽ
GS, DIN, and VDE Safety Marks – Germany/EU
تنظيم: TUV, VDE
Germany’s TUV standards agency operates the GS Mark (Geprüfte Sicherheit = tested safety) to show conformity with German’s Equipment and Product Safety Act (GPSG = Geräte- und Produktisicherheitgesetz). The GS Mark assures commercial buyers and consumers the product has been tested by an authorized institution such as TUV Rheinland. The DIN Mark is another marking scheme operated by TUV Rheinland certifying component compliance with DIN, EN, IEC, and ISO product safety standards.
The VDE Testing and Certification Institute is another German-based independent testing organization for electrical and electronic products. The VDE Mark indicates conformity with the VDE standards, European or internationally harmonized standards, and confirms compliance with protective requirements of the applicable EC Directive(s).
Type F Plug Power Cords
Germany Schuko CEE7/4 2 Prong- 16 Amp
Germany and Spain use the Schuko CEE7/4 standard 2 پرنگ 16 amp, which has side grounding clips. Power cables manufactured in compliance with European CEE7/4 standards. VDE agency approvals and certifications are available on the product specification page.
Power Plug Standards: قسم اي آئوٽليٽ
BSI Kitemark - U.K.
تنظيم: ASTA
The British Standards Institution (BSI) was the world’s first national standards body and continues to be a leading global standards maker. BSI is also the U.K.’s National Standards Body, representing U.K. interests worldwide. The BSI Kitemark is a voluntary certification mark, globally recognized as a symbol of trust, that shows a product or service meets applicable and appropriate British, European, International, and other standards for quality, safety, ڪارڪردگي, and trust.
Type G Plug/U.K. پاور تار
UK BS1363 3 Pin - 13 Amp
The UK BS1363 standard 3 پن 13 amp typically has a 13 amp fused plug and is used throughout the United Kingdom. The BS1363 replaced the old British BS 546 standard, which is no longer used in the U.K. but is still widely used in India and South Africa. Power cables manufactured in compliance with UK BS 1363 standards. ASTA agency approvals and certifications are available on the product specification page.
Power Plug Standards: Type G
Safety Marking Schemes
Understanding the complexities and subtle differences between various standards and marking schemes can be daunting. This application note aims to identify the major standards that relate to power supply cord safety, the agencies that administer them and/or provide certification, and the marking schemes that can be used to show compliance.
DENAN PSE Safety Marks – Japan
تنظيم: JET
The PSE Mark is used to comply with Japan’s Electrical Appliance and Material Safety Law (DENAN) as applied to various classes of products and equipment.
Japan Power Cords
Japan JIS C 8303 Class I 3 Prong - 15 Amp
The Japan JIS C 8303 class I standard 3 پرنگ 15 amp grounded appears to be physically identical to the NEMA 5-15 found in North America. In many cases, a North American plug will mate with Japan receptacles without an adapter. قسم اي آئوٽليٽ, the Japan standard holds tighter dimensional measurements than North America, which means that North American plugs will not quite fit into Japan receptacles in some cases. Power cords manufactured in compliance with Japanese JIS C 8303 standards and PSE agency approvals and certifications are available on the product specification page.
Power Plug Standards: قسم اي آئوٽليٽ
Japan JIS C 8303 Class II 2 Prong - 15 Amp
The Japan JIS C 8303 class II standard 2 پرنگ 15 amp non-grounded appears to be physically identical to the NEMA 1-15 found in North America. In many cases, a North American plug will mate with Japan receptacles without an adapter. قسم اي آئوٽليٽ, the Japan standard holds to tighter dimensional standards than North America, which means that North American plugs will not quite fit into Japan receptacles in some cases. Power cords manufactured in compliance with Japanese JIS C 8303 standards. PSE agency approvals and certifications are available on the product specification page.
Electrical Plug Standards: قسم اي آئوٽليٽ
KC Mark – Korea
تنظيم: KTL
Korea’s KC Mark is administered by its Agency for Technology and Standards (KATS) to show compliance for mandated products with the Electrical Appliances and Materials Safety Control Law. It replaced the original EK mark.
Korea Power Cords
Korea KS C 8305 2 Prong - 2.5 amp
The Korea KS C 8305 standard 2 پرنگ 2.5 amp non-grounded is physically the same as the Europe CEE7/16. Power cords manufactured in compliance with Korean KS C 8305 standards and KTL agency approvals and certifications are available on the product specification page.
Power Plug Standards: قسم اي آئوٽليٽ
Korea KS C 8305 3 Prong - 16 Amp
The Korea KS C 8305 standard 3 پرنگ 16 amp is physically the same as the Europe CEE7/7. Power cords manufactured in compliance with Korean KS C 8305 standards and KTL agency approvals and certifications are available on the product specification page.
Power Plug Standards: قسم اي آئوٽليٽ
BSMI Mark – Taiwan
تنظيم: BSMI
The BSMI (Bureau of Standards, Metrology, and Inspection) Certification is the approval scheme for Taiwan’s ITE and audio/ video products.
Type A/B Plug Power Cords
Taiwan CNS10917 2 Prong - 15 Amp
The Taiwan CNS10917 standard 2 پرنگ 15 amp non-grounded appears to be physically identical to the NEMA 1-15 found in North America. In many cases, a North American plug will mate with Taiwanese receptacles without an adapter. قسم اي آئوٽليٽ, the Taiwanese standard holds to tighter dimensional standards than North America. This means that North American plugs will not quite fit into Taiwanese receptacles in some cases. Power cords manufactured in compliance with Taiwanese CNS 10917 standards. BSMI agency approvals and certifications are available on the product specification page.
Power Plug Standards: قسم اي آئوٽليٽ
Taiwan CNS10917 3 Prong - 15 Amp
The Taiwan CNS10917 standard 3 پرنگ 15 amp grounded appears to be physically identical to the NEMA 5-15 found in North America. In many cases, a North American plug will mate with Taiwanese receptacles without an adapter. قسم اي آئوٽليٽ, the Taiwanese standard holds tighter dimensional measurements than North America. This means that North American plugs will not quite fit into Taiwanese receptacles in some cases. Power cords manufactured in compliance with Taiwanese CNS 10917 standards. BSMI agency approvals and certifications are available on the product specification page.
Power Plug Standards: قسم اي آئوٽليٽ
CCC Safety Marks – China
تنظيم: سي سي سي
The CCC (China Compulsory Certificate) Mark indicates compliance with Chinese laws and regulations and, as its name implies, is compulsory for any product used for commercial purposes in China.
China Power Cords
China GB1002 and GB2099 2 Pin - 15 Amp
The China GB1002 and GB2099 standard 2 پن 15 amp non-grounded appear to be physically identical to the NEMA 1-15 found in North America. In many cases, a North American plug will mate with China receptacles without an adapter. قسم اي آئوٽليٽ, the China standard holds tighter dimensional measurements than North America, meaning North American plugs will not quite fit into China receptacles in some cases. Power cords manufactured in compliance with Chinese GB 2099 standards. CCC agency approvals and certifications are available on the product specification page.
Power Plug Standards: قسم اي آئوٽليٽ
China GB2099 3 Pin - 10 Amp
The China GB2099 standard 3 پن 10 amp is physically the same as the Argentina IRAM 2073. Power cords manufactured in compliance with Chinese GB 2099 standards and CCC agency approvals and certifications are available on the product specification page.
Power Plug Standards: Type I
China GB2099 3 Pin - 16 Amp
The China GB2099 standard 3 پن 16 amp version has a broader grounding blade and may not be inserted in a 10 Amp receptacle. Power cords manufactured in compliance with Chinese GB 2099 standards and CCC agency approvals and certifications are available on the product specification page.
Power Plug Standards: Type I
PSB ‘SAFETY’ Mark – Singapore
تنظيم: PSB SPRING
Singapore’s safety authority, the Productivity and Standards Board (PSB), requires all controlled goods to be individually marked with the SAFETY Mark.
Type G Plug Power Cords
Singapore SS 145 3 Pin- 13 Amp
The Singapore SS 145 standard 3 پن 13 amp typically has a 13 amp fused plug and is used throughout the United Kingdom. The BS 1363A replaced the old Singapore BS 546 standard, which is no longer used in the U.K. but is still widely used in India and South Africa. Power cords manufactured in compliance with Singapore SS145/a standards. PSB agency approvals and certifications are available on the product specification page.
Power Plug Standards: Type G
RCM Tick Safety Marks– Australia
تنظيم: SAA Mark
Australia has a national standards body, Standards Australia, covering many different industry sectors including Electrotechnology and Energy, which embraces electrical/electronic equipment and appliances with relevant standards for safety. Australia’s Regulatory Compliance Mark (RCM) now consolidates the previously separate C-Tick, A-Tick, and RCM mark, effective from March 2013.
Australia AS/NZS 3112 2 Pin - 2.5 Amp
The Australia and New Zealand AS/NZS 3112 standard 2 پن 2.5 amp non-ground are physically the same as the Argentina IRAM 2073 but the line blades are insulated. Power cords are manufactured in compliance with Australian AS 3112 standards. SAA agency approvals and certifications are available on the product specification page.
Electrical Plug Standards: Type I
Australia AS/NZS 3112 3 Pin - 10 Amp
The Australia and New Zealand AS/NZS 3112 standard 3 پن 10 amp are physically the same as the Argentina IRAM 2073 and the China GB2099 but the line blades are insulated. Power cords are manufactured in compliance with Australian AS 3112 standards. SAA agency approvals and certifications are available on the product specification page.
Electrical Plug Standards: Type I
Australia AS/NZS 3112 3 Pin - 15 Amp
The Australia and New Zealand AS/NZS 3112 standard 3 پن 15 amp version has a wider grounding blade and may not be inserted in a 10 Amp receptacle. Power cords are manufactured in compliance with Australian AS 3112 standards. SAA agency approvals and certifications are available on the product specification page.
Except the above section highlights some of the more notable safety marking schemes, the following are other remaining International power cords approvals & regulations.
Electrical Plug Standards: Type I
بين الاقوامي پاور تار
Austria Power Cords
تنظيم: OVE
Austria Schuko CEE7/4 2 Prong - 16 Amp
The Austria Schuko CEE7/4 standard 2 پرنگ 16 amp which has side grounding clips. Power cables manufactured in compliance with European CEE7/4 standards. OVE agency approvals and certifications are available on the product specification page. IEC Type F
Electrical Plug Standards: قسم اي آئوٽليٽ
Type E Plug Power Cords
تنظيم: CEBEC
Belgium Schuko CEE7/6 3 Prong - 16 Amp
The Belgium Schuko CEE7/5 standard 3 Prong wall receptacle has a round male pin for grounding. Power cables manufactured in compliance with European CEE7/6 standards and CEBEC agency approvals and certifications are available on the product specification page.
Electrical Plug Standards: Type E
Type K Plug Power Cords
تنظيم: DEMKO
Denmark AFSNIT 107-2-D1 3 Prong - 13 Amp
The Denmark AFSNIT 107-2-D1 standard 3 پرنگ 13 amp is also referred to as SRAF 1962/DB 16/87. Power cords manufactured in compliance with Denmark AFSNIT 107-2-D1 standards. DEMKO agency approvals and certifications are available on the product specification page.
Electrical Plug Standards: Type K
Type F Plug Power Cables
تنظيم: FIMKO
Finland Schuko CEE7/4 2 Prong - 16 Amp
The Finland Schuko CEE7/4 standard 2 پرنگ 16 amp has side grounding clips. Power cables manufactured in compliance with European CEE7/4 standards. FIMKO agency approvals and certifications are available on the product specification page.
Electrical Plug Standards: قسم اي آئوٽليٽ
Type E Plug Power Cables
تنظيم: LCIE
France Schuko CEE7/6 3 Prong -16 Amp
France and Belgium use the Schuko CEE7/5 standard 3 Prong wall receptacle, which has a round male pin for grounding. Power cables manufactured in compliance with European CEE7/6 standards. LCIE agency approvals and certifications are available on the product specification page.
Electrical Plug Standards: قسم اي آئوٽليٽ
Italy Power Cords
تنظيم: IMQ
Italy CEI 23-50 3 Prong - 10 Amp
The Italy CEI 23-50 standard 3 پرنگ 10 amp uses the center pin for grounding. Power cords manufactured in compliance with Italian CEI 23-50 standards. IMQ agency approvals and certifications are available on the product specification page.
Electrical Plug Standards: Type L
Italy CEI 23-50 3 Prong - 16 Amp
The Italy CEI 23-50 standard 3 پرنگ 16 amp version has wider line blades and may not be inserted in a 10 Amp receptacle. CEI agency approvals and certifications are available on the product specification page.
Electrical Plug Standards: Type L
Type F Power Cables
تنظيم: SEMKO
Sweden Schuko CEE7/4 2 Prong - 16 Amp
The Sweden Schuko CEE7/4 standard 2 پرنگ 16 amp has side grounding clips. Power cables manufactured in compliance with European CEE7/4 standards. SEMKO agency approvals and certifications are available on the product specification page.
Electrical Plug Standards: قسم اي آئوٽليٽ
Swiss Power Cords
تنظيم: ESTI (SEV)
Switzerland SEV 1011 3 Prong - 10 Amp
The Switzerland SEV 1011 standard 3 پرنگ 10 amp will also accept the Europlug CEE7/16. قسم اي آئوٽليٽ, the connection will be non-grounded. Power cords manufactured in compliance with Swiss SEV 1011 standards. ESTI agency approvals and certifications are available on the product specification page.
Electrical Plug Standards: Type J
Switzerland SEV 1011 3 Prong - 16 Amp
Switzerland SEV 1011 standard 3 پرنگ 16 amp version has a broader line blade and may not be inserted in a 10 Amp receptacle. Power cords manufactured in compliance with Swiss SEV 1011 standards. ESTI agency approvals and certifications are available on the product specification page.
Electrical Plug Standards: Type J
يورپي پاور تار
تنظيم: KEMA
Netherlands Schuko CEE7/4 2 Prong - 16 Amp
The Netherlands Schuko CEE7/4 standard 2 پرنگ 16 amp has side grounding clips. Power cords manufactured in compliance with European CEE7/4 standards. KEMA agency approvals and certifications are available on the product specification page.
Electrical Plug Standards: قسم اي آئوٽليٽ
Israel Power Cords
تنظيم: ڏيو
Israel SI-32 2 Prong - 2.5 Amp
اسرائيل SI-32 معيار 2 پرنگ 2.5 amp is physically the same as the Europlug. اسرائيلي SI32 معيارن ۽ SII ايجنسي جي منظورين ۽ سرٽيفڪيشنن جي تعميل ۾ ٺاهيل پاور ڪيڊ پراڊڪٽ جي وضاحت واري صفحي تي موجود آهن.
Electrical Plug Standards: قسم اي آئوٽليٽ
Israel SI-32 3 Prong - 16 Amp
اسرائيل SI-32 معيار 3 پرنگ 16 amp زمين جي طور تي سينٽر پرونگ استعمال ڪري ٿو. اسرائيلي SI32 معيارن ۽ SII ايجنسي جي منظورين ۽ سرٽيفڪيشنن جي تعميل ۾ ٺاهيل پاور ڪيڊ پراڊڪٽ جي وضاحت واري صفحي تي موجود آهن.
Electrical Plug Standards: قسم H
India Power Cords
تنظيم: BIS
India IA6A3 3 Prong - 6 Amp (Small)
The India IS694 and IA6A3 standard 3 پرنگ 6 amp (IS1293 and BS546) replaced Old British standard BS 546 6amp. Power cords manufactured in compliance with Indian IA16A3 standards, aka Old English BS546. BIS agency approvals and certifications are available on the product specification page.
Electrical Plug Standards: قسم ڊي
India IA16A3 3 Prong - 16 Amp (Large)
The India IS694 and IA16A3 standard (aka IS1293 and BS546) 3 پرنگ 16 amp is the same as the South Africa SANS 164-1. Power cords manufactured in compliance with Indian IA16A3 standards, aka Old English BS546. BIS agency approvals and certifications are available on the product specification page.
Electrical Plug Standards: قسم M
South Africa Power Cords
تنظيم: SABS
South Africa SANS 164-3 (aka BS546) 3 Prong - 6 Amp (Small)
The South Africa SANS 164-3 (BS546) standard 3 پرنگ 6 amp replaced Old British standard BS 546 6amp. Power cords manufactured in compliance with South African SABS 164-3 standards, Old English BS546. SABS agency approvals and certifications are available on the product specification page.
Electrical Plug Standards: قسم ڊي
South Africa SANS 164-1 (aka BS546) 3 Prong - 16 Amp (Large)
The South Africa SANS 164-1 (aka BS546) standard 3 پرنگ 16 amp is the same as India IS 1293 IA16A3. Power cords manufactured in compliance with South African SABS 164-1 standard Old English BS546. SABS agency approvals and certifications are available on the product specification page.
Electrical Plug Standards: قسم M
Type G Plug Power Cables
تنظيم: SASO
Saudi Arabia SASO 2203 3 Pin - 13 Amp
The Saudi Arabia SASO 2203 standard 3 پن 13 amp typically has a 13 amp fused plug throughout the United Kingdom. The BS 1363A replaced the old Saudi Arabia BS 546 standard, which is no longer used in the U.K. but is still widely used in India and South Africa. Power Cables manufactured in compliance with Saudi SASO 2203 standards. ASTA agency approvals and certifications are available on the product specification page.
Electrical Plug Standards: Type G
SUMMARY
Despite efforts within Europe, North America, and elsewhere to bring about harmonization of safety standards for electrical equipment, including power cords, there are still many different regulations, testing, and certification procedures that may need to be taken into account to meet legislative requirements in the various territories where such equipment will be sold. Understanding all of these is a challenge. This application notes that the article presents a reasonably comprehensive overview of the various standards, agencies, and safety marks as a definitive guide for power cords.
DCpowercord is China’s leading پاور ڪيبل ٺاهيندڙن. It follows best practices to ensure its power cords meet the highest levels of safety and performance, offering products approved to standards such as UL, CE, and SAA while also providing quality solutions utilize the latest in efficient green power technology.
For more information on regulatory and compliance topics, you can search on our website resource content.
حاصل ڪريو هڪ مفت اقتباس توهان جي پروجيڪٽ لاءِ
اسان جي ٽيم توهان جي ايندڙ منصوبي جي حمايت ڪرڻ لاء تيار آهي, پوء اڄ اسان سان رابطو ڪريو!